Philips 32pw9534 사용자 설명서

There is a wide range of audio and video equipment that can be connected 
to your TV. The following connection diagrams show you how to connect it.
See also Connection diagrams in the 

menu where the

different connection possibilities are shown. Each time a menu item is selected
a graphic is shown of the connection. Those graphics have no operational
function.

Connect the aerial cables 1, 2 and, to obtain a better picture quality,
eurocable 3 as shown opposite. 

You have to do the following if you do not connect the eurocable 3.

Unplug the aerial cable 1 from the aerial socket x of your video recorder.

Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)

Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 5. 

Store the test signal either under programme number 0 or between 90 and 99.

Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.

Connect a eurocable 4 to your decoder and to the special euroconnector of
your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to 

or 

with a

eurocable.

Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to 

and a

eurocable 4 to 

or

.

Look for the test signal of your peripheral in the same way as you do for a
video recorder.

When a video recorder is connected to 

you can only record a

programme from your TV.
Only when a video recorder is connected to 

it is possible to

record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 19.

Amplifier
DVD
Decoder/Descrambler
VCR1
VCR2
Antenna

J

Connection diagrams

4873.1 gb     19-02-1999  16:04  Pagina 16