Philips ct9688-00bbasia 사용자 설명서

다운로드
페이지 105
8
Getting Started
Switch on the phone
Press 
 to switch on the phone. Long press when
charging. You may be requested to enter your PIN
code, which is the 4 to 8 digit security code of your
SIM  card  to  protect  it  from  authorized  use.  It  is
preconfigured and provided to you by your network
operator or retailer. To change your PIN code, see
“Change code” on page 35.
If you enter a wrong PIN code 3 times in succession,
your SIM card is blocked. To unblock it, you must
request the PUK code from your network operator.
Set date and time
At first switch on, the date and time on the phone are
in the factory default settings. You need to reset the
date and time. Set the date by pressing the
corresponding numeric keys  on  the  keypad  (press
 to erase a number). Then, proceed in the same
way to set the time. 
For  complete  date  and  time  options,  please  see
page 84.
Calibrate the touchscreen
It is advisable to carry out screen calibration in order
to obtain  better accuracy when using it with the stylus
pen. Press  
 and follow the screen instructions. You
have to tap all the 5 symbols on the screen with the
stylus pen one after another to complete the process. 
Charge the battery
Your phone is powered by a standard or an ultra-slim
rechargeable battery (depending on your country of
purchase). An alarm will warn you when the battery
reaches low. When the battery is completely flat, the
charging icon will only appear after a few minutes of
charging. 
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result . If you do remove it, the
date and time settings are only memorized for a short
while. As such, you need to reset the information after 
you have installed the battery back again.