Philips ct5688-000000eu 사용자 설명서

다운로드
페이지 69
2
Getting  started
4.
Slide the battery back into its slot, metallic
connectors downwards, until it stops. Then lock
it by pushing it downwards.
5.
Replace the back cover by sliding it into its slots,
until it stops.
6.
Remove the protective film covering the screen
and the camera lens before using the phone.
To switch on the phone, press the 
)
 key. Enter the
PIN code if required (i.e. the 4- to 8-digit secret code
of  your  SIM  card).  It  is  preconfigured  and
communicated to you by your operator or retailer. To
personalise the PIN code, see page 25.
If you enter an incorrect PIN code 3 times, your SIM
card will be blocked. To unblock it, you must request
the PUK code from your operator.
The mobile phone detects a SIM card that already
contains names and a message asks you if you want to
copy your SIM phonebook onto the built-in
phonebook. Press 
L
 to refuse or 
R
 to accept.
For complete information about phonebooks, see
“Contacts” page 17.
Your phone is powered  by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1.
Once the battery and battery cover are clipped
on the phone, plug the connector of the
provided charger into the socket at the base of
Switch on the phone
Copy the SIM phonebook
Charge the battery
Philips568_GB_4311 255 60731.book  Page 2  Mardi, 5. octobre 2004  3:24 15