Philips dvdr1000-051 사용자 설명서
English
32 RECORDING
Manual recording
Checking input
Normally, the DVD recorder displays the contents of
the disc on screen. Use the TUNER key in order to
switch to the internal tuner, or whichever other source
is selected, if you want to check the input before starting
a recording. Press TUNER again to go back to disc
mode.
the disc on screen. Use the TUNER key in order to
switch to the internal tuner, or whichever other source
is selected, if you want to check the input before starting
a recording. Press TUNER again to go back to disc
mode.
Recording
l
Insert a recordable DVD+RW disc.
l
Use CHANNEL 3 or CHANNEL 4 (on the
recorder) or P+, P- or the digit keys 0-9 (on the
remote control) to select the programme number
(programme name) from which you wish to record.
‰
recorder) or P+, P- or the digit keys 0-9 (on the
remote control) to select the programme number
(programme name) from which you wish to record.
‰
When a TV channel transmits a channel name,
it will be shown on the display.
The following programme numbers are provided for
recording from external sources:
recording from external sources:
‘EXT1’ : TV set via
SCART
1
socket
‘EXT2’ : for recording from external sources via
SCART
2
socket
’EXT3’ : rear S-video
‘EXT4’ : rear CVBS
‘CAM1’ : front S-video
‘CAM2’ : front CVBS
‘CAM3’ : front DV.
‘EXT4’ : rear CVBS
‘CAM1’ : front S-video
‘CAM2’ : front CVBS
‘CAM3’ : front DV.
l
Press RECORD (on the recorder) or REC/OTR
(on the remote control).
‰
(on the remote control).
‰
RECORD
is shown on the display.
l
Press 9 STOP to stop recording.
l
The Index Picture Screen is updated.
‰
‰
MENU UPDATE is shown on the display.
l
After a short recording on a new disc, a few minutes
will be needed to complete the formatting of the
disc.
will be needed to complete the formatting of the
disc.
Direct record
l
l
Make sure ‘Direct record’ is switched
On.
(See record settings).
l
On the TV set, select the programme number you
want make the recording from.
want make the recording from.
l
Press RECORD (on recorder) or REC/OTR
(on remote control) with the DVD recorder
switched to standby.
(on remote control) with the DVD recorder
switched to standby.
Notes:
- Don’t select another programme number on your TV set,
until ‘
- Don’t select another programme number on your TV set,
until ‘
WAIT’ on the display of your DVD recorder disappears.
This can take up to one minute.
- When ’
- When ’
NOTV’ appears on the display, the programme
number could not be found. The DVD recorder switches off
automatically.
- If your loudspeakers are connected (via an amplifier/
receiver) to your DVD recorder, the sound will be delayed
relative to the TV picture when recording directly from the TV
set.
automatically.
- If your loudspeakers are connected (via an amplifier/
receiver) to your DVD recorder, the sound will be delayed
relative to the TV picture when recording directly from the TV
set.
Manual audio control
You can control the audio recording level of your DVD
recorder manually.
l
recorder manually.
l
In tuner mode, press AUTO/MAN REC VOLUME
on the DVD recorder.
‰
on the DVD recorder.
‰
The display will show the current audio level and
MANUAL
appears.
l
Adjust the recording level with MANUAL 3 or 4
on the DVD recorder, so that the ‘0 dB’ mark lights
up during the loudest parts of the recording.
on the DVD recorder, so that the ‘0 dB’ mark lights
up during the loudest parts of the recording.
l
You can switch back to automatic audio level control
by pressing AUTO/MAN REC VOLUME again.
‰
by pressing AUTO/MAN REC VOLUME again.
‰
The display will show the current disc position
and
MANUAL
disappears.
Note:
When DV input is selected, manual volume control is disabled.
When DV input is selected, manual volume control is disabled.
SP
CHANNEL
DVD
RW
TITLE
CHAPTER
TIME
REMAIN
-30
-40
-10
-20
0
OVER
-30
-40
-10
-20
0
OVER
STEREO
RECORD
MANUAL
TV/DVD
STANDBY
REC/OTR
PLAY
STOP
FORWARD
REVERSE
NEXT
PREVIOUS
PAUSE
SLOW
a
P
MUTE
T/C
TUNER