Philips dvdr890-001 사용자 설명서
65
Timer
ShowView system
Date
01
01
Prog.
BBC1
BBC1
Start
20:15
20:15
VPS
PDC End
PDC End
21:30
Rec
Mode
SP
Mode
SP
Mo-Fr/Weekly
Press SELECT
Press SELECT
To store
Press OK
6
The decoded information appears after confirmation. You can go back
at any time to change the information. Select the appropriate input
field using
at any time to change the information. Select the appropriate input
field using
C or D . If required, change the information using B ,
A or the number buttons 0..9 .
Switching on 'VPS/PDC' in the '
Start' input field
Select the 'Start' input field using
C . Using SELECT switch on 'VPS/PDC'
('*' lights up). If you press SELECT again, you will switch 'VPS/PDC' off ('*'
disappears).
disappears).
Changing the recording quality in the '
End' input field
Select the 'End' input field using
C . Using SELECT , select the recording
mode 'HQ, SP+, EP, EP+'.
Tip
7
If all the information is correct, press the
OK button. The
programming information is stored in a TIMER block.
8
To end, press TIMER .
9
Load a DVD (unprotected) ready for recording.
The current disc is checked.
The current disc is checked.
0
Switch off with STANDBY
m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY
recorder has been switched off using the STANDBY
m button.
If any of the TIMER blocks are in use, '
s' will light up on the display.
ENGLISH
Programming a recording (TIMER)