Philips dvdr890-001 사용자 설명서
66
Programming a recording
(without the ShowView
(without the ShowView
®
System)
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
the DVD recorder.
2
Press TIMER on the remote control.
The programming method last selected is marked.
The programming method last selected is marked.
Timer
Timer programming
Date
01
01
Prog.
BBC1
BBC1
Start
20:15
20:15
VPS
PDC End
PDC End
21:30
Rec
Mode
HQ
Mode
HQ
Mo-Fr/Weekly
Press SELECT
Press SELECT
To store
Press OK
3
Select 'Timer programming' with
B or A . and confirm with C .
The current information will appear on the screen.
4
Select the input field with
D or C .
5
Enter information with
B or A or with the number buttons 0..9 .
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'
'
Mo-Fr': Repeated daily recordings from Monday to Friday
'
Mo': Repeated weekly recordings (every week on the same day, e.g. Monday).
Programme numbers of scart sockets '
EXT1' and 'EXT2'
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('EXT1') or EXT 2 AUX I/O ('EXT2').
'Switching on 'VPS/PDC' in the '
Start' input field
Select the 'Start' input field using
TIMER . Using
SELECT switch on
'VPS/PDC' ('*' lights up). If you press
SELECT again, you will switch
'VPS/PDC' off ('*' disappears).
Changing the recording quality in the '
End' input field
Select the 'End' input field using TIMER .
Using SELECT , select the recording mode'HQ, SP, SP+, LP, EP, EP+'.
Using SELECT , select the recording mode'HQ, SP, SP+, LP, EP, EP+'.
Tip
6
If all the information is correct, press
OK . The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Load a DVD (unprotected) ready for recording.
The disc is checked.
The disc is checked.
9
Switch off with STANDBY
m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY
recorder has been switched off using the STANDBY
m button.
If any of the TIMER blocks are in use, '
s' will light up on the display.
Programming a recording (TIMER)