Philips dvp3268k 사용자 설명서
:c\a^h]
37
Audio Setup Page
(underlined options are the factory default settings)
Setup Menu Options
(continued)
Analog Output
Digital Audio Setup
This setting is only required if you have connected the audio
output of this unit to a stereo device, multi channel audio system
or TV using the analog output jack.
output of this unit to a stereo device, multi channel audio system
or TV using the analog output jack.
{ LT/RT }
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
the surround sound through the two
speakers.
{ Stereo }
– The connected device can only output
stereo audio through two speakers.
{ Multi Channel } – The connected device can output 5.1
channel sound.
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
output of this unit to an amplifier/receiver using the digital
output jack.
{ Digital Output } – {
SPDIF Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{
All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
channel audio formats. The digital audio
format will be output as on disc.
{
PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
{ LPCM Output } – {
48 K }
Select this to play disc recorded at
sampling rate of 48 kHz.
sampling rate of 48 kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifier/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to ‘48 K’.
the amplifier/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to ‘48 K’.
Note: LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
activated. The higher the sampling rate, the better the sound
quality.
dvp3268K_93_eng.indd 37
3/19/2009 4:30:51 PM