Philips esp2 사용자 설명서
38
DATE
Forced Flash Mode
When taking photographs of subjects in strong light or with backlighting, dark shadows
may appear on the image. Forced Flash Mode is used to soften shadows. The flash will
operate in all lighting conditions.
may appear on the image. Forced Flash Mode is used to soften shadows. The flash will
operate in all lighting conditions.
q
When the REC(ord)/PLAY switch is set to
REC, press the FLASH button until the [ ]
symbol appears on the LCD monitor. The
Flash LED will blink.
REC, press the FLASH button until the [ ]
symbol appears on the LCD monitor. The
Flash LED will blink.
The FLASH LED will light when the Release but-
ton is pressed lightly.
ton is pressed lightly.
Note: The flash LED flashes while the flash is charging; a
picture cannot be taken at this time.
w
Press the RELEASE button.
The camera will take a picture with the flash.
Canceling the Mode
Press the FLASH button repeatedly to select another mode.
Flash Distance
The recommended shooting range is approximately 0.6 m to 3.0 m if the flash is
used. If the flash does not reach the subject, a dark, underexposed image may re-
sult. If the lens-to-subject distance is less than 25 cm (10 in.), the image may look
washed-out.
used. If the flash does not reach the subject, a dark, underexposed image may re-
sult. If the lens-to-subject distance is less than 25 cm (10 in.), the image may look
washed-out.