Philips fw-c85-02rw 사용자 설명서
23
English
3139 116 19611
RECORDING
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 with full spool to the left and a
blank tape into tape deck 2 with full
spool aside.
blank tape into tape deck 2 with full
spool aside.
3 Press í or ë to select the recording
tape side
(see Tape Side under TAPE
section).
4 Press DUB (HSD)
once for normal
speed dubbing or
twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
™ "NORMAL" (normal speed) or
"
FAST" (high speed) will be
displayed, followed by "
DUB" with "!
or
@" scrolling left or right depending
on the tape side selected.
™ The
HSD
appears on the display
during high speed dubbing.
• Dubbing will start immediately.
™ The
REC
starts flashing.
5 Press Ç to stop dubbing.
Notes:
– Only
– Only
å
å
å
å
å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
volume.
– You can listen to another source while
dubbing.
– Dolby B NR button has no influence
during dubbing (dubbing from tape deck
1 to tape deck 2). An original tape
recorded with Dolby B NR automatically
produces a copy with Dolby B NR.
1 to tape deck 2). An original tape
recorded with Dolby B NR automatically
produces a copy with Dolby B NR.
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the order
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The
REC
starts flashing.
• CD will start playback automatically.
4 Press Ç to stop recording.
4 Press Ç to stop recording.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2.
TUNER or AUX) will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
2 Press RECORD to start recording.
™ The
REC
starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
– When you press RECORD while in TAPE
mode, "
SELECT SOURCE" will be
displayed. One Touch Recording is not
possible in TAPE mode.
possible in TAPE mode.
pg 01-29/C85-C83/22-Eng
3/6/00, 1:01 PM
23