Philips gc4015 사용자 설명서
Important
For optimal safety, first read these instructions before you are going to
use the iron:
- The user must not leave the iron unattended while it is connected to
use the iron:
- The user must not leave the iron unattended while it is connected to
the supply.
- This appliance is not intended for use by young children without
supervision.
- Young children should be supervised to ensure that they do not play
with the appliance.
- The soleplate of the iron can become extremely hot and may cause
burns if touched.
- Never use the appliance if it is damaged in any way.
- After finished ironing, during filling or emptying the water tank or
- After finished ironing, during filling or emptying the water tank or
even when you leave the iron for a while, unplug from the wall
socket, set the steam control to position 0 and put the iron on its
heel.
socket, set the steam control to position 0 and put the iron on its
heel.
- If the supply cord is damaged, it must be replaced by Philips or its
service agent or a similarly qualified person in order to avoid a
hazard.
hazard.
Before first use
1
Check if the voltage rating on the typeplate corresponds to the
mains supply in your home.
C
2
Remove any sticker, protective foil or storage cover (Type
GC4043, GC4040, GC4028, GC4025 only) from the soleplate.
3
Heat up the iron to maximum temperature and iron over a
piece of damp cloth for several minutes to remove any residue
on the soleplate.
on the soleplate.
The iron may give out some smoke when using it for the first time.
After a short while this will cease.
After a short while this will cease.
Filling the water tank
Do not immerse the iron in water.
1
Remove the mains plug from the wall socket.
C
2
Set the steam control to position O (= no steam).
3
Open the filling cap.
4
Hold the iron in a tilted position.
ENGLISH
4