Philips lx3750w-22s 사용자 설명서
11
English
C
ONNECTIONS
Step 6: Connecting the power
cord
After everything is connected properly, plug in the
AC power cord to the power outlet.
Never make or change any connections with the power
switched on.
AC power cord to the power outlet.
Never make or change any connections with the power
switched on.
Step 7: Connecting a VCR or
Cable /Satellite Box
Viewing and listening to the playback
1 Connect the VCR or Cable/Satellite Box to the TV as
shown.
2 Connect the DVD system’s AUDIO IN-AUX jacks to the
AUDIO OUT jacks on the VCR or cable / satellite box.
Before starting operation, press
AUX/DI on the remote to
select “
AUX-ANA” in order to activate the input source.
Recording DVDs
Some DVDs are copy-protected. You cannot record or
dub protected discs using a VCR.
Some DVDs are copy-protected. You cannot record or
dub protected discs using a VCR.
3 Connect the DVD system’s VIDEO jack to the VIDEO IN
jack on the VCR.
4 Connect the DVD system’s AUDIO OUT jacks to the
AUDIO IN jacks on the VCR. This will allow you to make
analogue stereo (two channel, right and left) recordings.
analogue stereo (two channel, right and left) recordings.
To view DVD playback while recording. You must connect
the DVD system to your TV using the SCART or the S-
VIDEO connection.
the DVD system to your TV using the SCART or the S-
VIDEO connection.
ANT IN
TO TV
VCR or
Cable/Satellite
Box
OUT
IN
Rear of TV
(example only)
AUDIO
OUT
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
SCART IN
2
A/V SCART OUT
AUDIO IN
AUX
AUDIO OUT
WOOFER
LINE OUT
S-VIDEO
VIDEO OUT
VIDEO
(8 )
SPEAKERS
FR
SL
SR
SW
C
FL
OUT
OPTICAL
COAXIAL
DIGITAL
IN
1
2 4
3
2
A/V SCART OUT
AC MAINS~
S-VIDEO
VIDEO OUT
VIDEO
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
~ AC MAINS
4
1
Connections
IMPORTANT!
The type plate is located at the bottom of the
system.
The type plate is located at the bottom of the
system.
This product complies with the radio interference
requirements of the European Community.
requirements of the European Community.
The apparatus shall not be expose to dripping or
splashing and that no objects filled with liquid such
as vase shall be placed on the apparatus.
splashing and that no objects filled with liquid such
as vase shall be placed on the apparatus.
To avoid overheating of the system, a safety circuit
has been built in. Therefore, your system may
switch to Standby mode automatically under
extreme conditions. If this happens, let the
system cool down before reusing it.
has been built in. Therefore, your system may
switch to Standby mode automatically under
extreme conditions. If this happens, let the
system cool down before reusing it.