Philips mc-90 사용자 설명서
16
English
3139 115 20972
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "
CHECK ANTENNA" is displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
within 15 seconds, the system will exit Plug and
Play mode.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press and hold Ç on the
system until "
DEMO ON" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
● Press and hold Ç on the system until
"
DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Switching the system on
In standby/demonstration mode
● Press STANDBY ON to switch on the last
selected source.
● Press CD 1•2•3 (CD 123), TUNER, CDR or
AUX.
● Press any one of the disc CD OPEN•CLOSE
buttons or
CDR OPEN•CLOSE.
➜ The system will switch to the respective CD
or CDR mode.
or CDR mode.
In Eco Power standby mode
● Press ECO POWER to switch on the last
selected source.
● Press CD 123, TUNER, CDR or AUX on the
remote control.
Switching the system to standby
mode
mode
In demonstration mode
● Press and hold Ç on the system.
In any other source mode (except Eco
Power standby mode)
Power standby mode)
● Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
➜ The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 1 Watt)
Power standby mode (< 1 Watt)
● Press ECO POWER (or press and hold B on
the remote control).
➜ "
➜ "
ECO PWR" is displayed, then the display
screen will go blank.
➜ The low power ECO POWER LED will be
lighted.
➜ The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
Basic Functions
pg 001-038/MC90/22-Eng
1/29/02, 6:37 PM
16