Philips mc-90 사용자 설명서
24
English
3139 115 20972
Adjusting the record level
You can adjust the reference record level for
recordings from the internal CD changer or
external source. This feature can be used for
fading your recordings in or out.
recordings from the internal CD changer or
external source. This feature can be used for
fading your recordings in or out.
1
Press
CD1•2•3.
● For additional appliance, press AUX repeatedly
to select : “
AUX DIGITAL”, “AUX ANALOG H”
or “
AUX ANALOG L”.
2
Start playback the disc or external source.
3
Press
REC LEVEL to activate volume control
for record level adjustment.
4
Adjust the
MASTER VOLUME to select the
desired record level. The loudest sounds in the
material to be recorded should not reach the
red levels of the level bar.
➜ The actual record level (in dB) is displayed.
material to be recorded should not reach the
red levels of the level bar.
➜ The actual record level (in dB) is displayed.
Note:
– If the record level is too low, recording will not be
possible. It is advisable to adjust to normal
listening level.
– If the record level is too low, recording will not be
possible. It is advisable to adjust to normal
listening level.
Preparation for recording
1
Load in an
unfinalised CDR(W) in the CD
recorder tray.
➜ The CDR(W) used for recording should be
absolutely free of scratches and dust particles in
the CD recorder tray.
➜ The CDR(W) used for recording should be
absolutely free of scratches and dust particles in
the CD recorder tray.
2
Prepare the source to be recorded.
CD 1•2•3 – load the disc(s). To start from a
specific track, make a programme.
TUNER – tune to the desired radio station.
AUX – connect additional appliance.
CD 1•2•3 – load the disc(s). To start from a
specific track, make a programme.
TUNER – tune to the desired radio station.
AUX – connect additional appliance.
When a recording is in progress
➜ The arrow light and
➜ The arrow light and
REC
IN
PROGRESS
are
shown. The actual recording time left starts to
count down.
count down.
● During high speed recording, COPY CD or
COMPILE CD, the sound will be muted.
● It is not possible to listen to another source.
● It is not possible to activate the timer function.
● It is not possible to activate the timer function.
To exit recording mode
● Press NO or Ç.
EDIT TEXT
NO
SEARCH/
TUNE
TUNE
SEARCH/
Cancel
STOP
PROG
JOG CONTROL
COMPILE CD
ERASE
CD
CDR
TUNER
AUX
FINALIZE
CD
PLAY/
PAUSE
RECORD
CD 1•2•3
PREV
PRESET
NEXT
PRESET
Enter
NO
COPY CD
YES
Internal recording
Recording from internal CD changer or
tuner.
tuner.
Recording a single track
1
Play your desired track on the CD changer.
2
Press
RECORD.
➜ “
REC TRX?” is displayed, “X“ denotes the
disc tray number.
3
Press
YES.
➜ Playback and recording start from the
beginning of the selected track.
beginning of the selected track.
FINALISE the recorded CDR(W) before use
for playback.
for playback.
Recording an entire disc
1
Press
CD1•2•3 to select the disc you wish to
copy.
● If a programme is available, it will temporarily be
ignored until recording ends.
2
Press
COPY CD.
➜ The arrow starts flashing and
“
“
RECORD CDX?“ is displayed.
3
Press
YES.
➜ The recording starts in high speed mode and
finalises automatically after completing.
finalises automatically after completing.
Recording
pg 001-038/MC90/22-Eng
1/29/02, 6:38 PM
24