Philips MCM239 사용자 설명서
English
7
General Information
Congratulations on your purchase and
welcome to Philips!
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Philips offers, register your product at
www.philips.com/welcome.
Supplied accessories
– 1 X certified power adapter
(Brand name: PHILIPS,
Model No.: AS180-150-AF
Input: 100-240V ~50/60Hz 0.7A,
Input: 100-240V ~50/60Hz 0.7A,
Output: 15V 1.2A)
– 2 speaker boxes including 2 speaker cables
– remote control (with 1 x CR2025 battery)
– MW loop antenna
– FM wire antenna
– stand
– remote control (with 1 x CR2025 battery)
– MW loop antenna
– FM wire antenna
– stand
Environmental Information
All unnecessar y packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Disposal of your old product
Your product is designed
and manufactured with
high quality materials and
components, which can be
recycled and reused.
and manufactured with
high quality materials and
components, which can be
recycled and reused.
When this crossed-out
wheeled bin symbol is
attached to a product it means the
product is covered by the European
Directive 2002/96/EC
wheeled bin symbol is
attached to a product it means the
product is covered by the European
Directive 2002/96/EC
Please inform yourself about the local
separate collection system for electrical
and electronic products.
separate collection system for electrical
and electronic products.
Please act according to your local rules
and do not dispose of your old products
and do not dispose of your old products
with your normal household waste. The
correct disposal of your old product will
help prevent potential negative
consequences for the environment and
human health.
correct disposal of your old product will
help prevent potential negative
consequences for the environment and
human health.
Safety Information
●
Place the system on a flat, hard and stable
surface.
surface.
●
Where the MAINS plug or an appliance coupler
is used as the disconnet device, the disconnet
device shall remain readily operable.
is used as the disconnet device, the disconnet
device shall remain readily operable.
●
Install the unit near the AC outlet and where the
AC power plug can be easily reached.
AC power plug can be easily reached.
●
The apparatus shall not be exposed to
dripping or splashing.
dripping or splashing.
●
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
●
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
●
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
should be placed on the apparatus.
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
be placed on the apparatus.
●
If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
●
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
lubricating bearings and must not be oiled or
lubricated.
●
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
shall not be exposed to excessive heat such as
sunshine, fire or the like.
●
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
P001-P027_MCM239_98_Eng 23/8/07,
17:24
7