Philips sbcru940 사용자 설명서
User Guide
4
2 Insert 4 AA batteries (included
with the Remote Control) as
indicated on the bottom of
the battery compartment.
indicated on the bottom of
the battery compartment.
3 Slide the battery door back on.
After a few seconds, the Remote Control starts up automatically and beeps
twice to indicate that it is ready to use.
twice to indicate that it is ready to use.
When batteries are running low, the Low Battery icon
flashes at the center
top of the display. Replace the batteries as soon as possible to ensure perfect
performance.
performance.
Note
The Remote Control retains all settings when batteries have run out or when
you replace them. You will only have to reset the clock.
you replace them. You will only have to reset the clock.
Optional recharging dock
Warning
Use the recharging dock only with the Philips NiMH rechargeable battery pack.
1 Slide the battery door off the back of the Remote Control.
2 Remove the plastic AA battery tray
from the battery compartment.
3 Insert the battery pack (included
with the recharging dock) as
indicated on the side of the
battery pack.
indicated on the side of the
battery pack.
Introduction