Philips snu6600 사용자 설명서

EN

If the Link LED on 

PC or other network

Make sure the computer and other 

the Wireless USB

devices switched off.

network devices are receiving power.

Adapter does not light, 
or if you cannot access 
any network resources 
from the computer.

No access to a

Service unavailable.

Check that you have enabled and 

Windows or Net-

configured the service correctly.

Ware service on the

If you cannot connect to a particular 

network.

server, be sure that you have access
rights and a valid ID and password.
If you cannot access the Internet, be
sure you have configured your system
for TCP/IP.

If your wireless

Router / Access 

Make sure the access point that the 

adapter cannot

Point is switched off.

router is associated with is powered 

communicate with a

on.

computer in the
network when

Range too long 

Reposition your Wireless Adapter.

configured for

(weak radio signal).

Infrastructure mode.

Wrong settings.

Make sure the SSID and the network
encryption key are the same as those
used by the wireless access point.

Network speed 

USB 1.1 port used 

Connect the wireless adapter to a 

does not 

in stead of USB 2.0.

hi-speed USB 2.0 port for maximum 

exceed 11 Mbps.

speed.

Other network 

Make sure all network components 

components are 

are suitable for high network speeds.

unsuitable for higher 
network speeds.