Philips vr210 사용자 설명서
— 5 —
To insert the batteries:
1
Remove the battery compartment lid
from the bottom of the remote
control.
from the bottom of the remote
control.
• For some PHILIPS TV only:
After pressing
TV
, operates the TV’s
menus.
21 OK/STATUS button
Before using this button, press
VCR
or
TV
to select your target component.
• After pressing
VCR
:
– Goes to the next item on the VCR
menus.
– Displays the time counter, present
time, channel number, and
remaining tape length. (✈P.14)
remaining tape length. (✈P.14)
• After pressing
TV
:
For some PHILIPS TV only:
– Displays the TV’s on-screen
– Displays the TV’s on-screen
information.
– Exits from TV’s menu operations
when using the TV’s menus.
For other manufacturers’ TVs:
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
Note:
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
3
Replace the lid.
25 SKIP SEARCH buttons
Press during tape playback to fast
forward 30 seconds of a tape. (✈P.13)
forward 30 seconds of a tape. (✈P.13)
26 AUDIO/MUTE button
Before using this button, press
VCR
or
TV
.
• After pressing
TV
, turns off the TV
sound.
27 REC (record)/OTR button
• Start recording when pressed once.
(✈P.12)
• Starts a recording for 30 minutes to 6
hours long. When pressed more than
once, the shut-off time increases in
30-minute intervals. (✈P.14)
once, the shut-off time increases in
30-minute intervals. (✈P.14)
22 CH (channel)
5 / ∞ button
Before using this button, press
VCR
or
TV
.
• After pressing
VCR
, changes the
channels on the VCR. Release at a
desired channel.
desired channel.
• After pressing
TV
, changes the
channels on the TV. Release at a
desired channel.
desired channel.
23 TIMER button
Display the Timer Recording menu.
(✈P.15)
(✈P.15)
24 REC (ord) END SEARCH
button
Press prior to recording a program to
find the end of a previously recorded
program and the unrecorded portion of
a tape.(✈P.13)
find the end of a previously recorded
program and the unrecorded portion of
a tape.(✈P.13)
2
Install two AA batteries —
R6(SUM-3)/AA — matching
polarity indicated inside the battery
compartment.
R6(SUM-3)/AA — matching
polarity indicated inside the battery
compartment.
CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
On-Screen Display
The following information (VCR operating status) appears on the TV screen. (✈P.14)
Current time
Operation mode
Note on the displayed information
• The time counter and remaining tape
• The time counter and remaining tape
length will not be correct when playing
back an NTSC tape.
back an NTSC tape.
• When you playback a thin tape like an
E-240 cassette tape or compact video
cassette tape (VHS-C), the remaining
tape length will flash.
cassette tape (VHS-C), the remaining
tape length will flash.
Remaining tape length
Tape speed
Index no.
Time Counter
Channel no.
Tape position indicator
SmartPicture setting
PLAY 15:00
CH12
CH12
AUTO
B-----+-----+-----+-----+-----+-----E
B-----+-----+-----+-----+-----+-----E
REMAIN 2:30 INDEX -1
LP
LP
0:00:00
vr210/410/55
00.3.6, 1:07 PM
5