Pfaff 1183 사용자 설명서

Preparation

9 Preparation

All regulations and instructions in this Instruction Manual are to be observed!

Special attention is to be paid to the safety regulations!

All preparation work is only to be carried out by appropriately trained personnel.

Before all preparation work, the machine is to be separated from the electricity

supply by removing the plug from the mains or switching off the On/Off switch!

.01

Inserting the needle

Switch off the machine!

Danger of injury due to uninten-

tional starting of the machine!

Only use needles from the sys-

tem intended for the machine,

see Chapter 3 Specifi cations.

● Raise needle bar.

● Loosen screw 1 and insert needle 3 until

you feel it stop.

● The long needle groove must be aligned

in the direction of the machine head.

● Tighten screw 1.

Fig. 9 - 01