Planar m46L 사용자 설명서
Aspect Ratio Settings
m40L/m46L Installation & Configuration Guide
39
Justify Settings
Justify determines how the picture will be placed in a wall of displays. For a single
display, Justify determines placement on the screen.
display, Justify determines placement on the screen.
Top/Left
Positions the image starting with the top, leftmost display, then across and down. If
the image is not large enough to fill all the displays, they are left blank.
the image is not large enough to fill all the displays, they are left blank.
Center
Positions the image starting with the center of the image in the center of the wall
spreading out equally to all displays. If the image is not large enough to fill all
displays, they are left blank.
spreading out equally to all displays. If the image is not large enough to fill all
displays, they are left blank.
Bottom/Right
Positions the image starting with the bottom, rightmost display, then across and up.
If the image is not large enough to fill all the displays, they are left blank.
If the image is not large enough to fill all the displays, they are left blank.
Overscan
This is used to hide blank areas and stray lines in the edges of an image. The lower
the overscan setting, the more of the optical image that is seen. Standard CRT
televisions have an overscan of about 5%. Overscan defaults to 3% for video images.
the overscan setting, the more of the optical image that is seen. Standard CRT
televisions have an overscan of about 5%. Overscan defaults to 3% for video images.