Pelco E708-24 사용자 설명서

Prior to installation and use of this product, the following WARNINGS should be observed.

1.

Installation and servicing should only be done by qualified service personnel and conform
to all local codes.

2.

Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to rain
and moisture.

3.

Only use replacement parts recommended by Pelco.

4.

After replacement/repair of this unit’s electrical components, conduct a resistance mea-
surement between line and exposed parts to verify the exposed parts have not been con-
nected to line circuitry.

The product and/or manual may bear the following marks:

Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.

This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within
this unit.

This symbol indicates that there
are important operating and main-
tenance instructions in the litera-
ture accompanying this unit.

3500 Pelco Way,
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

The E700 Series Dust-Tight Enclosure is designed to protect CCTV cameras operating in
small-particle and dusty environments. Stainless steel models are available for use in corro-
sive atmospheres.

E706-16

6-inch diameter x 16-inch length (15.24 cm x 40.64 cm), aluminum con-
struction

E706-16P

Same as E706-16, except with purge fittings (15.24 cm x 40.64 cm)

E706-16PS

Same as E706-16P, except type 304 stainless steel construction

E706-16S

Same as E706-16, except type 304 stainless steel construction

E706-24

6-inch diameter x 24-inch length (15.24 cm x 60.96 cm), aluminum con-
struction

E706-24P

Same as E706-24, except with purge fittings

E706-24PS

Same as E706-24P, except type 304 stainless steel construction

E706-24S

Same as E706-24, except type 304 stainless steel construction

E708-24

8-inch diameter x 24-inch length (20.32 cm x 60.96 cm), aluminum con-
struction

E708-24P

Same as E708-24, except with purge fittings

E708-24PS

Same as E708-24P, except type 304 stainless steel construction

E708-24S

Same as E708-24, except type 304 stainless steel construction

 Models with purge

fittings require a filtered
compressed air supply up
to 35 psi at 10 cfm to pro-
vide positive internal air
pressure circulation. Uses
1/4-inch NPT fittings.