Pelco esprit es31c 사용자 설명서

C309M-J (9/04)

17

Az/El programs the horizontal display position of the Azimuth

1

/Elevation

2

 label.

NOTE:  Az/El display is not available while you are programming or running a pattern.

The following settings are available for the Az/El label:

Off – Label is not displayed.
Left (default) – Label is displayed on the left-hand side of the screen.
Center – Label is displayed in the center of the screen.
Right – Label is displayed on the right-hand side of the screen.

To program the horizontal label position for Az/El:

1.

Program preset 95 (28). The main menu appears.

2.

Position the cursor (>) beside Other.

3.

Press the Iris Open button to enter the Other menu.

4.

Position the cursor (>) beside Az/El/Direction.

5.

Press the Iris Open button to enter the Az/El/Direction menu.

6.

Position the cursor (>) beside Az/El.

7.

Press the Iris Open button. The cursor moves to the right.

8.

Move the joystick up or down to view the available selections.

9.

SELECT – Press the Iris Open button to make a selection.
CANCEL – Press the Iris Close button to cancel selection.

1

 Azimuth is the pan angle from 0

°

 to 359

°

.

2

 Elevation is the tilt position from 33

°

 to -83

°

.

<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Other>
Exit

Proportional pan

On

Park time minutes

0

Scan Speed deg/s

25

Pattern Length

1.5 min

Spd Profile
<Zone Blank>
<Az/El/Direction>
Exit

Other Menu

Az/El/Direction

Set Azimuth Zero
Az/El
Az/El Line
Direction
Direction Line
Zoom
Zoom Line
Disp Duration
Exit