Pelco is110 사용자 설명서
TECHNICAL SPECIFICATIONS
GENERAL
Construction
Aluminum with steel camera mounting
bracket and polycarbonate dome
bracket and polycarbonate dome
Finish
Light gray polyester powder coat
Light Attenuation
Smoked
1.5 F-stops light loss
Clear
Zero light loss
Unit Weight
2.20 lb (1.00 kg)
Shipping Weight
4.0 lb (1.81 kg)
ELECTRICAL
Input Voltage*
12 VDC or 24 VAC (±10%), autosensing
Synchronization
Internal or AC line lock
Power Consumption
Camera
<3 W (DW/CW models)
< 4 W (DN/CH models)
< 4 W (DN/CH models)
Heaters
10 W when active; thermostatically controlled
MECHANICAL
Cable Entry
One 0.75-inch (1.91 cm) NPT threaded
opening on side; two 0.75-inch (1.91 cm)
openings on base
opening on side; two 0.75-inch (1.91 cm)
openings on base
Pan/Tilt Adjustment
Manual
Pan
360°
Tilt
80° (20° to 100° range)
Rotation
360°
VIDEO
Signal System
NTSC or PAL
Video Output
Composite
1 Vp-p, 75 ohms
UTP
1 Vp-p, 100 ohms
Video Connectors
1 composite BNC and 1 UTP
Service Connector
3-conductor, 2.5 mm connector for video
output to optional ICS-SC cable
output to optional ICS-SC cable
ENVIRONMENTAL
Environment
Low temperature, indoor/outdoor
Operating Temperature
-50° to 122°F (-46° to 50°C);
de-ices to 25°F (-4°C)
Thermostat Operation
Heater is thermostatically controlled to
activate ON at 50°F (10°C) and OFF at
80°F (27°C)
80°F (27°C)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class B
• Meets NEMA Type 4X and IP66 standards
• U.S. Patents D476,025; 6,715,939 B2; 6,805,498 B2
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class B
• Meets NEMA Type 4X and IP66 standards
• U.S. Patents D476,025; 6,715,939 B2; 6,805,498 B2
5.50
(13.97)
3.79
(9.63)
4.01
(10.19)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.36
(6.00)
1.76
(4.47)
*24 VAC power is recommended when installing any Camclosure Integrated Camera System under fluorescent lighting conditions.