Packard Bell compaesseo 300 사용자 설명서
4
2. Lift the antenna holder from the mainboard.
Fig. 5
The screw that keeps the antenna holder in place.
The GPS Module
Follow these steps to remove the GPS module:
1. Disconnect the GPS cable from the Mainboard (see the square in Fig. 6).
2. Remove the two screws of the GPS module (See the circles in Fig. 6).
3. Lift the module from the mainboard.
4. Disconnect the cable from the GPS module.
2. Remove the two screws of the GPS module (See the circles in Fig. 6).
3. Lift the module from the mainboard.
4. Disconnect the cable from the GPS module.
Fig. 6
The GPS module, cable connector and screws.