Maytag bravos w10092823a - sp 사용자 설명서

Install and store your washer where it will not freeze. Because 

some water may stay in the hoses, freezing can damage your 

washer. If storing or moving your washer during freezing weather, 

winterize it.

Operate your washer only when you are at home. If you will be on 

vacation or not using your washer for an extended period of time, 

you should:

Unplug washer or disconnect power.

■

■

Turn off the water supply to the washer. This helps avoid 

■

■

unintended flooding (due to a water pressure surge) while  

you are away.

1.  Shut off both water faucets.
2.   Disconnect and drain water inlet hoses.
3.  Put 1 qt (1 L) of R.V.-type antifreeze in the basket.
4.    Run washer on the Rinse & Spin setting for about 30 seconds to 

mix the antifreeze and remaining water.

5.  Unplug washer or disconnect power.

1.  Flush water pipes and hoses. Reconnect water inlet hoses. Turn 

on both water faucets.

2.  Plug in washer or reconnect power.
3.   Run the washer through the Bulky cycle to clean the washer 

and remove the antifreeze, if used. Use only HE detergent.  

Use 

1

/

2

 the manufacturer’s recommended amount for a 

medium-size load.

1.  Shut off both water faucets.
2.  Disconnect and drain water inlet hoses.

3.   If the washer will be moved during freezing weather, put 1 qt 

(1 L) of R.V.-type antifreeze in the basket. Run washer on the 

Rinse & Spin setting for about 30 seconds to mix the antifreeze 

and remaining water.

4.  Disconnect the drain from the drain system.
5.  Unplug the power cord.
6.  Place the inlet hoses into the basket.
7.  Drape the power cord and drain hose over edge into the 

basket.

8.   Place foam packing ring from the original shipping materials in 

the top of washer. If you do not have the original foam packing 

ring, place heavy blankets, towels, etc. into basket opening. 

Close the lid and put a piece of tape over the lid and down 

to the front of the washer. Keep lid taped until the washer is 

placed into the new location.

1.  Follow the “Installation Instructions” to locate, level, and 

connect the washer.

2.   Run the washer through the Bulky cycle to clean the washer 

and remove the antifreeze, if used. Use only HE detergent.  

Use 

1

⁄

2

 the manufacturer’s recommended amount for a  

medium-size load.