Maytag electric dyer 사용자 설명서

The location must be large enough to allow the dryer door to open fully. 
Dryer Dimensions

*Most installations require a minimum 5" (12.7 cm) clearance behind the dryer for the 

exhaust vent with elbow. See “Venting Requirements.”

The following spacing dimensions are recommended for this dryer. This dryer has been tested 
for spacing of 0" (0 cm) clearance on the sides and rear. Recommended spacing should be 
considered for the following reasons:

■

Additional spacing should be considered for ease of installation and servicing.

■

Additional clearances might be required for wall, door and floor moldings.

■

Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

■

For closet installation, with a door, minimum ventilation openings in the top and bottom 
of the door are required. Louvered doors with equivalent ventilation openings are 
acceptable.

■

Companion appliance spacing should also be considered. 

*Required spacing

This dryer is suitable for mobile home installations. The installation must conform to the 
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the 
Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or the 
Canadian Manufactured Home Standard, CAN/CSA-Z240 MH.
Mobile home installations require:

■

Metal exhaust system hardware, which is available for purchase from your dealer.

■

Special provisions must be made in mobile homes to introduce outside air into the dryer. 
The opening (such as a nearby window) should be at least twice as large as the dryer 
exhaust opening.

 

   

A

B

C