Maytag ls7806s 사용자 설명서

•  Plug cord into live electrical outlet.
•  Check fuse or reset circuit breaker.
•  Close lid and pull control knob out to start the washer. For your safety, 

washer will not fill unless the lid is closed.

•  Turn both faucets on fully.
•  Straighten inlet hoses.
•  Disconnect hoses and clean screens.  Hose filter screens may be plugged.

•  Check fuse or reset circuit breaker.
•  Turn the control knob to proper cycle and pull knob out to start the washer.  
•  Close lid and pull control knob out to start the washer.  For your safety, 

washer will not agitate or spin unless the lid is closed.

•  Unevenly distributed load.  Redistribute the load, close the lid and pull knob

out.  Check for leveling.  Be sure water level is acceptable for load size.  

•  Check fuse or reset circuit breaker.
•  Straighten drain hoses. Eliminate kinked hoses.  If there is a drain restriction,

call for service.

•  Close lid and pull control knob out to start the washer.  For your safety, wash-

er will not agitate or spin unless the lid is closed.

•  Suds lock – caused by too much suds.  Rewash without detergent. Use cor-

rect amount of a low-sudsing detergent.

(Continued on next page.)