Maytag neptune washer 사용자 설명서

SING THE

ONTROLS

Step 3

Press the arrow pad to select the spin speed.

Max Extract or Max Extract Plus (select models) – Use for heavy

loads such as towels and bedding. Removes more water from loads during

spin.

High (select models) – Use for underwear, t-shirts, jeans and sturdy cottons.

Medium – Use for jeans, wrinkle free or “wash-and-wear” items and

synthetics.
Gentle – Use for items that will be hung up or laid flat to dry.
Low – Use for delicate items needing a slow spin speed because of fabric and

construction.
Drain Only (select models) – Drains the washer without spinning. Use for

extremely delicate items that cannot tolerate any spin.

ELECT

PIN

PEED

FABRICS NOTE: To minimize wrinkling of wrinkle free and no-iron

fabrics, do not use the Max Extract or Max Extract Plus spin option for

these loads. Also, DO NOT overload the washer.

Step 2

Press the arrow pad to select the wash and rinse water temperatures. Follow

the garment care label and chart below for best results.

Sanitary/Cold (select models) – Heavily soiled, colorfast items. Only avail-

able with the Sanitary cycle.

Hot/Cold – Whites and heavily soiled color-fast items.

ATC Warm/Warm – Color-fast items.When warm rinse is selected, only

the final rinse will be warm.The other rinses will be cold to conserve energy.

ATC Warm/Cold – Moderately soiled, color-fast items; most wrinkle free

items.

ATC Cold/Cold – Brightly colored, lightly soiled items.

Cold/Cold – Brightly colored, very lightly soiled items; washable woolens.

ELECT

ASH

INSE

ATER

EMPERATURES

IMPORTANT: The washer features an automatic temperature control (ATC) to provide a warm wash of approximately 105˚ F, a cold wash of

approximately 65˚ F and a warm rinse of approximately 80º F in the final rinse only on the ATC temperature selections.

REMEMBER: In wash water temperatures below 65˚ F, detergents do not dissolve well or clean well.

Control features vary by model.