MGE UPS Systems 3000 사용자 설명서
MGE UPS SYSTEMS
Addenda du manuel d’installation
5103056000_AB
Addenda du manuel d’installation
5103056000_AB
3
3 – Installation of the cables for EPO, external communication and set in parallel :
In order to ensure a good positioning of the different strands of cables on the front panel, it is
necessary to follow the recommendations of installation below :
Do separate the strands of fine wire from the power cables along their progress.
Parallel configurations :
In order to ensure a good positioning of the different strands of cables on the front panel, it is
necessary to follow the recommendations of installation below :
Do separate the strands of fine wire from the power cables along their progress.
Parallel configurations :
A torus ferrite provided with the parallel devices, in order to guarantee the EMC class A level,
must be installed like indicated on the figure below ;
EPO cable
To be clamp
separately
To be clamp
separately
Not supplied
(max. 2.5 mm²)
External By-Pass
cubicle cables
not supplied
(max. 1.5 mm²)
cubicle cables
not supplied
(max. 1.5 mm²)