Mercedes Benz 2002 ml 320 사용자 설명서

다운로드
페이지 342
187
Automatic transmission
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Neutral
No power is transmitted from the engine to the 
drive axle. When the brakes are released, the 
vehicle can be moved freely (pushed or towed). Do 
not engage “N” while driving except to coast 
when the vehicle is in danger of skidding (e.g. on 
icy roads, see winter driving instructions on 
page 199).
Important!
Coasting the vehicle, or driving for any other 
reason with selector lever in “N” can result in 
transmission damage that is not covered by the 
Mercedes-Benz Limited Warranty.
The transmission automatically upshifts through 
5th gear. Position “D” provides optimum driving 
characteristics under all normal operating 
conditions.
Gear selection for special circumstances
The transmission gear ranges for special circumstances 
can be selected by pressing the selector lever to the 
right or the left with the selector lever in position “D”.
The gear range currently selected is indicated in the 
instrument cluster display.
Briefly press selector lever in the “D –” direction:
The transmission will shift from the current gear range 
to the next lower gear range.
Press and hold selector lever in the “D –” direction:
The selector lever position display will switch to the 
gear range currently selected by the automatic 
transmission.
Shifting into another gear range that allows for quicker 
acceleration or to slow the vehicle down is possible. 
Downshifts can also be performed.
Note:
To avoid overrevving the engine when the selector lever 
is moved in “D –” direction, the transmission will not 
shift to a lower gear range if the engine’s revolutions 
per minute limit would be exceeded.