Mercedes Benz 2002 ml 320 사용자 설명서

다운로드
페이지 342
220
Driving systems
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
If the charging voltage falls below 10 volts, the 
malfunction indicator lamp comes on and the ABS is 
switched off. When the voltage is above this value again, 
the malfunction indicator lamp should go out and the 
ABS is operational.
If the ABS malfunction indicator lamp stays illuminated, 
have the system checked at your authorized 
Mercedes-Benz Light Truck Center as soon as possible.
Notes:
To alert following vehicles to slippery road conditions 
you discover, operate your hazard warning flashers as 
appropriate.
Operating the vehicle on a single axle dynamometer 
should only be done for briefly testing the brakes. To do 
so, move selector lever to position “N”. The engine must 
be shut off (key in steering lock position 0 or 1).
LOW RANGE – ABS
During off-road driving a special low range system for 
the antilock brake system (ABS) is operational with 
transmission in LOW RANGE mode, see page 229.
When applying the service brakes at speeds below 
approximately 18 mph (30 km/h), the front wheels are 
locked cyclically to shorten the braking distance (dig in 
effect). This affects steering the vehicle.
Warning!
ABS cannot prevent the natural laws of physics 
from acting on the vehicle, nor can it increase 
braking or steering efficiency beyond that afforded 
by the condition of the vehicle brakes and tires or 
the traction afforded. The ABS cannot prevent 
accidents, including those resulting from excessive 
speed in turns, following another vehicle too 
closely, or aquaplaning. Only a safe, attentive, and 
skillful driver can prevent accidents. The 
capabilities of an ABS equipped vehicle must never 
be exploited in a reckless or dangerous manner 
which could jeopardize the user’s safety or the 
safety of others.