Mercedes Benz 2002 ml 320 사용자 설명서

다운로드
페이지 342
270
Tires, Wheels
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Using the wrench, tighten the five bolts evenly, 
following the sequence illustrated, until all bolts are 
tight. Observe a tightening torque of 110 ft.lb. (150 Nm).
Ensure proper tire pressure.
Notes:
The removed road wheel cannot be stored in the 
space-saver wheel carrier or inside the storage 
compartment in the rear cargo area (ML 55 AMG), but 
should be transported in the rear cargo compartment 
wrapped in a protective cover supplied with the vehicle. 
The protective cover is located in the rear cargo 
compartment behind the cover in the right side trim 
panel.
Model ML 55 AMG:
Store air pump in its proper location. Close and latch the 
spare wheel cover, see page 261.
1
2
3
4
5
 P40.10-2446-26
Warning!
Always replace wheel bolts that are damaged or 
rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be repaired 
immediately.
Incorrect mounting bolts or improperly tightened 
mounting bolts can cause the wheel to come off. 
This could cause an accident. Be sure to use the 
correct mounting bolts.