Mercedes Benz 2002 ml 320 사용자 설명서

다운로드
페이지 342
282
Exterior lamps
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Exterior lamps
Headlamp adjustment
Correct headlamp adjustment is extremely important. 
Check and readjust headlamps at regular intervals and 
when a bulb has been replaced.
For adjusting headlamp aim see page 290.
Replacing bulbs
To prevent a possible electrical short circuit, switch off 
lamp prior to replacing a bulb.
When replacing bulbs, install only 12 volt bulbs with 
the specified watt rating.
When replacing halogen bulbs do not touch glass 
portion of bulb with bare hands. Use plain paper or a 
clean cloth.
Warning!
Bulbs and bulb holders can be very hot. Allow the 
lamp to cool down before changing a bulb.
Halogen lamps contain pressurized gas. A bulb can 
explode if you:
• touch or move it when hot,
• drop  the  bulb,
• scratch the bulb.
Wear eye and hand protection.
Warning!
Because of high voltage in BiXenon lamps, it is 
dangerous to replace the bulb of repair the lamp 
and its components. We recommend that you have 
such work done by a qualified technician.