Magnadyne m1-nav 사용자 설명서
35
Feature Locations
RGB VIDEO RESET
PWR
SD
1
2
3
4
1. RGB/Video Switch: Leave the switch in the RGB
mode. Video mode has no function.
2. Reset Button: The navigation system may fail to
function normally due to the vehicle’s battery
condition, and could require resetting the navi-
gation microprocessor if:
condition, and could require resetting the navi-
gation microprocessor if:
• The vehicle has been “jump started” from a
dead battery condition.
• The vehicle battery becomes very low and is
quick-charged.
• The vehicle battery is removed and replaced.
Should any of these conditions occur, simply
press and release the RESET button using the
tip of a ball point pen. This will reset the micro-
processor to the original factory settings. After
pressing the RESET button, you should recheck
to see if the navigation system functions nor-
mally.
press and release the RESET button using the
tip of a ball point pen. This will reset the micro-
processor to the original factory settings. After
pressing the RESET button, you should recheck
to see if the navigation system functions nor-
mally.
3. Power Indicator: Indicates when the navigation
system has power.
4. SD Card: The navigation system comes pre-
loaded with the navigation SD card. Do not
remove the memory card. This could result in
loss of data.
remove the memory card. This could result in
loss of data.
M1-NAV 8/4/08 1:23 PM Page 35