Mitel 3000 5330 사용자 설명서

Mitel 5330/5340 IP Phones – User Guide 

The Cordless Devices Application provides access to module information and pairing for hand- or 
headsets.  

To access the Cordless Devices Application, do one of the following: 

• Press 

Applications and then press Cordless Devices 

•  Press a feature key you have programmed as the Cordless Devices Application key. 

For information about programming feature keys, refer to 

on page 13. 

Note: When the pairing button on the Cordless Module is pressed, or when the battery level of a 
cordless accessory is critically low, the phone will automatically open the Cordless Devices 
Application. 

You can use the Cordless Module Application to view protocol, firmware, and hardware 
information about the module. 

To view cordless module information 

1.  Access the Cordless Module Application. 

2. Press 

Cordless Module Info. Device information appears on the screen. 

3. Press 

Close to exit. 

When the battery of a cordless device reaches a near-critical level, the phone displays a warning. 
Until the battery is recharged (or until it becomes fully discharged), the warning is repeated at 
each new call made using the Prime Line. To continue with a call while charging the cordless 
accessory, switch to speakerphone and then cradle the cordless accessory. 

When a Cordless Module is installed and at least one device is paired, the Auto Dial feature is 
available in the Settings menu. You can program a number that is automatically dialed when a 
cordless device hookswitch button is pressed. 
 
To program an Auto Dial number: 

1.  

Press 

Settings or 

. 

2. Press 

Auto Dial, and then press Edit Number.  

3. Using 

, enter the auto dial number. 

4. Press 

Save. 

5. Press 

Edit Label.  

6. Using 

, enter the label. 

7. Press 

Save and then press Close.