Mitel 5005 사용자 설명서

User Guide

You can assign either one of these Call Forwarding features to a programmable key but not both to
the same key.

Note: When you program this feature through the Desktop Tool, there are two stages. The first is
to program the number of the extension that calls will be forwarded to by selecting
"Configure/Activate Call Forwarding" in the "I want to..." list.

To enable or disable CALL FORWARD BUSY INTERNAL:

•

 

Press the programmable key assigned to the CALL FORWARD BUSY INTERNAL feature.

To enable or disable CALL FORWARD BUSY EXTERNAL:

•

 

Press the programmable key assigned to the CALL FORWARD BUSY EXTERNAL feature.

This feature allows you to forward your incoming calls to an external destination, for example, a
cellular phone or your home number.

Note: This feature is not available at all extensions, please contact your Administrator if you
require this feature. Invoking REMOTE CALL FORWARD cancels any active internal call
forwarding, and vice versa. You cannot store the target external number under a personal key
programmed with the REMOTE CALL FORWARD feature.

To forward all your calls to an external destination:

1.  Press the function key that has been programmed for REMOTE CALL FORWARD. When you lift

your handset, you should hear interrupted dial tone indicating that you are forwarding your calls.

To cancel REMOTE CALL FORWARD:

1.  Press the REMOTE CALL FORWARD key.

FOLOW ME is similar to the CALL FORWARD ALL function but allows you to receive your calls at
another extension.

To activate FOLOW ME:

1.  Before you leave your desk, press the function key programmed for the FOLOW ME function.

2.  When you are at the extension from which you wish to receive your calls, dial the FOLLOW ME

(I’M HERE) code followed by the extension number.

Note: Contact your System Administrator for the FOLLOW ME (I’M HERE) code.

Note: To be able to activate FOLLOW ME from any extension, select "None" instead of a specific
extension number when you program the feature.

FOLLOW ME will not function if the "pulled-from" extension does not have the FOLLOW ME
feature enabled or active.