Motorola CT-39A 사용자 설명서
19
FT-8800R Operating Manual
MH-42
B6JS
M
ICROPHONE
The MH-42
B6JS
is similar to the MH-48
A6J
, but the MH-42
B6JS
does not include a DTMF
keypad and its illumination switch.
1
PTT Switch
Press this switch to transmit, and release it to receive.
2
[ACC]/[P]/[P1]/[P2] Buttons
[ACC] button: Press this button to switch the “Main”
band between the “Left” and “Right” displays on the
LCD screen. This is the best and easiest way to set
the “Main” band to the side you prefer.
Pressing and holding in this button for 1/2 second moves
operation to the next-highest frequency band on the “Main”
band.
[P] button: Press this button momentarily to switch the fre-
quency control for the “Main” band between the VFO and
Memory Systems.
When the “Main” band is set to the VFO mode, press and hold in this
button for 1/2 second to activate the Smart Search Feature.
When the “Main” band is set to the Memory mode, press and hold
in this button for 1/2 second to activates the “Memory Bank” feature.
[P1] button: Pressing this button repeatedly allows selection of the CTCSS or DCS mode
on the “Main” band. The selections available are:
band between the “Left” and “Right” displays on the
LCD screen. This is the best and easiest way to set
the “Main” band to the side you prefer.
Pressing and holding in this button for 1/2 second moves
operation to the next-highest frequency band on the “Main”
band.
[P] button: Press this button momentarily to switch the fre-
quency control for the “Main” band between the VFO and
Memory Systems.
When the “Main” band is set to the VFO mode, press and hold in this
button for 1/2 second to activate the Smart Search Feature.
When the “Main” band is set to the Memory mode, press and hold
in this button for 1/2 second to activates the “Memory Bank” feature.
[P1] button: Pressing this button repeatedly allows selection of the CTCSS or DCS mode
on the “Main” band. The selections available are:
ENC
ENC.DEC (Tone Squelch) DCS OFF ENC ......
[P2] button: Press this button momentarily to select the transmitter power output level on
the “Main” band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “Main” band is set to the Memory mode or Home Channel, press and hold in this
key for 1/2 second to switch the memory channel display between the “Frequency” format
and “Alpha-numeric Tag” format.
You can reprogram the [ACC], [P], [P1], and [P2] buttons for other functions, if desired.
See page 53 for details.
the “Main” band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “Main” band is set to the Memory mode or Home Channel, press and hold in this
key for 1/2 second to switch the memory channel display between the “Frequency” format
and “Alpha-numeric Tag” format.
You can reprogram the [ACC], [P], [P1], and [P2] buttons for other functions, if desired.
See page 53 for details.
3
LOCK Switch
This switch locks out the Microphone buttons (except for the keypad and PTT switch).
4
[UP]/[DWN] Button
Press (or hold in) either of these buttons to tune (or scan up or down) the operating
frequency or through the memory channels on the “Main” band. In many ways, these
buttons emulate the function of the (rotary) “Main” band DIAL knob.
frequency or through the memory channels on the “Main” band. In many ways, these
buttons emulate the function of the (rotary) “Main” band DIAL knob.
Notice: If you change the microphone from the MH-48
A6J
to the MH-42
B6JS
or
vice versa, change the setting of Menu #23 (MIC). See page 64 for details.
1
2
3
4
CONDENSER MIC
MH-42
B