Mitsubishi Electronics dx-tl4709u 사용자 설명서

28

Click “Alarm List” and the “Alarm List Search” screen appears 
in the sub-screen.

1.  Set the desired date/time and number of alarm list 

items to be acquired, and then click “Refresh” to 
acquire the alarm list.
•  The alarm list cannot be acquired without 

clicking “Refresh.”

•  Enter the needed number of alarm list items to 

be acquired in “Alarm Cnt.” If number entered is 
too large, depending on the recording condition, 
it may take a long time to acquire the list or 
the desired number of list items may not be 
acquired.

•  “Sensor” : Check the desired sensor number for 

acquiring the alarm list items.

2.  Select the “No.” desired, and then click “Search.”

•  Click “Prev(number)” for a search in the reverse 

direction and click “Next(number)” for a search 
in the forward direction.

•  Click “Refresh” again to re-acquire the “Alarm 

List,” and click “Close” to hide the “Alarm List 
Search” menu.

3.  When the image of the alarm is displayed, close the 

search screen and press   to review the alarm.

Click   to display the picture of the next alarm list item.

Click   to display the picture of the previous alarm list item.

This is the screen for making some of the recorder settings.

1.  Select “Configuration Menu” in the “[Main Menu]” 

screen.
• The “[Confi guration Menu]” screen appears.

2.  Select the desired “Configuration Menu” and left-

click.