Olympus FL-36R 사용자 설명서
40
EN
Warning display list
Warning details
Control panel
display
Remedy
Ref.
page
In AUTO mode:
Out of light control
range
Out of light control
range
(camera with
communication
capability)
Change the camera’s ISO sensitivity
or aperture setting.
or aperture setting.
P. 16
(camera without
communication
capability)
P. 37
In MANUAL mode:
Subject too close
Subject too close
When the optimum shooting distance
is less than 0.6 m (1.9 ft.) (0.5 m
(1.6 ft.) in case of close-up flash),
the displayed value blinks to alert
you that the shooting range does
not match the light emission area of
the flash.
1 Change the camera’s ISO
is less than 0.6 m (1.9 ft.) (0.5 m
(1.6 ft.) in case of close-up flash),
the displayed value blinks to alert
you that the shooting range does
not match the light emission area of
the flash.
1 Change the camera’s ISO
sensitivity or aperture setting.
2 Change the guide number setting.
P. 17
In FP MANUAL
mode:
Subject too close
mode:
Subject too close
1 Change the camera’s ISO
sensitivity or aperture setting.
2 Change the guide number setting.
P. 20
In all modes:
Wide panel
request warning
Wide panel
request warning
Set the wide panel.
P. 24
In all modes:
Downward bounce
Downward bounce
The light-emitting section is tilted 7°
downwards.
Cancel this setting except for close-
up flash photography.
downwards.
Cancel this setting except for close-
up flash photography.
P. 25
In all modes:
Wide panel
warning
Wide panel
warning
The wide panel is set.
Pay attention to the distance to the
subject since the guide number will
be lower.
Pay attention to the distance to the
subject since the guide number will
be lower.
P. 24
r2067_e_000_cs2j.indb 40
r2067_e_000_cs2j.indb 40
2007/10/01 10:49:55
2007/10/01 10:49:55