cortech datalog 3 사용자 설명서
Datalog 3 User Manual - Page 23 of 66
CORTECH DEVELOPMENTS LTD
Set the time using the arrow buttons then click OK.
The timer can be seen decrementing in the Auto column of the zone list.
The system will log the date, time, event = Auto-Inhibit, zone description and user setting the timer
The zone will automatically enable, when the timer elapses.
The zone will automatically enable, when the timer elapses.
The system will log the date, time, event = Auto-Enable, zone description and user =System.
Notes on this Auto Enable feature: The above timed inhibit feature can be further enhanced by setting zones as
'auto- enable'. The system provider using the Datalog 3 EDITOR can do this.
'auto- enable'. The system provider using the Datalog 3 EDITOR can do this.
If the auto- enable feature is ON for a zone then the zone will auto enable if the inhibit timer is set and
counts down to zero OR if the inhibit timer is set and the zone input returns to a secure state. E.g. A
magnetic contact on a roller shutter door is set with auto enable ON, and the inhibit timer is set to five
minutes.
counts down to zero OR if the inhibit timer is set and the zone input returns to a secure state. E.g. A
magnetic contact on a roller shutter door is set with auto enable ON, and the inhibit timer is set to five
minutes.
The roller shutter zone will remain inhibited until either the roller shutter is closed and the zone secured
OR the inhibit timer reaches zero after five minutes. This prevents the system being compromised by a
zone remaining inhibited for longer than was necessary. This auto enable feature should only be used
on stable state sensors and not on movement detectors such as PIR devices.
OR the inhibit timer reaches zero after five minutes. This prevents the system being compromised by a
zone remaining inhibited for longer than was necessary. This auto enable feature should only be used
on stable state sensors and not on movement detectors such as PIR devices.