ICOM ic-756pro3 사용자 설명서

29

3

BASIC OPERATION

■

SSB (LSB/USB), SSB data (LSB-D/USB-D), CW, CW
reverse (CW-R), RTTY, RTTY reverse (RTTY-R), AM,
AM data (AM-D), FM and FM data (FM-D) are avail-
able in the IC-756PROIII. Select the desired operation
mode as follows.

To select a mode of operation, push the desired mode
switch momentarily. Push the switch again to toggle
between USB and LSB, CW/CW-R and RTTY/RTTY-
R, AM and FM, if necessary. Push the switch for 1 sec.
to toggle between CW and CW-R, RTTY and RTTY-R,
or to select data mode, if necessary.
See the diagram below left for the order of selection.

Microphone signals are muted when data mode is
selected.

➥Push 

to select USB or LSB.

• USB is selected first when above 10 MHz; or LSB is se-

lected first when below 10 MHz operation.

• After USB or LSB is selected, push 

to toggle be-

tween USB and LSB.

• After USB or LSB is selected, push 

for 1 sec. to

select USB-D or LSB-D mode, respectively.

➥Push 

to select CW or RTTY.

• After CW or RTTY is selected, push 

to tog-

gle between CW and RTTY.

• After CW or RTTY is selected, push 

for

1 sec. to toggle between CW and CW reverse, or, RTTY
and RTTY reverse mode, respectively.

➥Push 

to select AM or FM.

• After AM or FM is selected, push 

to toggle be-

tween AM and FM.

• After AM or FM is selected, push 

for 1 sec. to

select AM-D or FM-D mode, respectively.

Mode selection

Push mode switch 
for 1 sec.

Push mode switch
momentarily.

■

➥Rotate 

control clockwise to increase; counter-

clockwise to decrease the audio output level.

• Set a suitable audio level.

Audio output
increases

Audio output

decreases

[AF]