Canton subwoofer 사용자 설명서

Please read the following operating precautions before use.
Canton will not be held responsible for any damage
and/or injury caused by not following the cautions below.

Install this loudspeaker in a cool, dry, clean place – away from windows,
heat sources, sources of excessive vibration, dust, moisture and cold.

Never open the cabinet. Contact your local dealer or a qualified
technician.

The voltage to be used must be the same as that specified on the rear
panel.

To reduce the risk or fire or electric shock, do not expose this unit to rain
or moisture.

Do not use force on switches, controls or connection wires. When
moving the unit, first disconnect the power plug and the wires connected
to other equipment. Never pull the wires themselves.

Since this unit has a built-in power amplifier, heat will radiate from the
rear panel. Place the unit at least 10 cm (4“) apart from the walls,
allowing enough spaces above, behind and on both sides of the unit to
prevent fire or damage. Do not cover the rear panel of this unit with a
newspaper, a tablecloth, a curtain, etc. in order not to obstruct heat
radiation. If the temperature inside the unit rises, it may cause fire,
damage to the unit and/or personal injury.

Please place the subwoofer at a safe distance to your TV set (min. 1m), it
might impair the picture color.

Please do not place any fragile objects on top or in front of the
subwoofer. Vibrations may break the object and may cause personal
injury.

Never put a hand or a foreign object into the ventilation port. When
moving this unit, do not hold the port as it might cause personal
injury and/or damage to this unit.

If you hear distorted noise (i.e., unnatural, intermittent “rapping” or
“hammering” sounds) coming from this unit, reduce the volume level.

Do not attempt to clean this loudspeaker with chemical solvents as this
might damage the finish. Use a clean, dry cloth.

Strong fluctuations in temperature may lead to condensation (water
droplets) forming inside the subwoofer. Wait until the moisture has
evaporated before starting up the system.