Insignia NS-C6500 사용자 설명서

Pencil
Keyhole or drywall saw
Phillips screwdriver
Small level
Fish tape or coat hanger
Wire strippers
Gloves
Safety goggles
Drill
1-inch fl at drill bit (if drilling through studs)
¼-inch to ½-inch drill bit (for drilling test hole)

Insignia speakers (2)
Paint plugs (2)
Grills (2)
Template (1)

Mount the speakers 6 to 10 feet apart. Each speaker should be the same 
distance from the listening area. For detailed mounting instructions, see 
“Ceiling mount instructions.”

Mount the speakers 6 to 10 feet apart and 3 to 6 feet behind the 
listening area. For detailed mounting instructions, see “Ceiling mount 
instructions.”

1 

Determine where you want to mount the speakers. The speakers 
must be mounted in areas where there are no obstructions like 
studs (joists). Tap the ceiling to fi nd a “hollow” space, or use a stud 
fi nder to locate the studs.

 

Note: Make sure that your speaker wires are long enough to run from the 
speakers to your audio equipment. If you plan to run the speaker wires 
through the walls or ceiling, the wires must be UL or CL rated to ensure 
your safety and to meet building code compliance.

2 

Position the cardboard mounting template on the ceiling where 
you want to mount a speaker, then trace around the template.

3 

Drill a small hole in the center of the template outline you drew on 
the ceiling.

4 

Bend a piece of coat hanger wire, then insert the wire into the hole. 
Slowly rotate the wire to check for any obstructions. If you fi nd an 
obstruction, patch the hole and fi nd a new location for the speaker.

5 

Using a keyhole or drywall saw, carefully cut the ceiling section you 
outlined, then remove the section.

6 

Run the wires from the speaker outputs on your audio equipment 
to your speakers. Allow a few extra feet of wire so you will have 
enough wire to strip the insulation and splice the wires. 

 

Note: Use high quality wire such as 16/4 speaker 
wire. If you need to run the wires a long distance, 
you can splice one or more lengths of wires 
together.

7 

(Optional) To improve speaker performance, insert unbacked 
fi berglass insulation behind and around the speaker.

 

Warning: To avoid personal injury, wear gloves when 
inserting the insulation.