Garmin g1000 beechcraftbaron58 g58 pilots guide 사용자 설명서
10-1
ANNUNCIATIONS & ALERTS
190-00629-00 Rev. A
Garmin G1000 Pilot’s Guide for the Beechcraft 58/G58
10.1 ANNUNCIATIONS AND
ALERTS
NOTE: The Beechcraft 58/G58 Pilot’s Operating
Handbook (POH) supersedes information found
in this document.
Handbook (POH) supersedes information found
in this document.
The G1000 Alerting System conveys alerts to the pilot
using a combination of the following items:
• Annunciation Window: The Annunciation
window displays abbreviated annunciation text.
The Annunciation window is located to the
right of the Altitude and Vertical Speed windows
on the PFD display (or the MFD if system is in
reversionary mode). Up to 12 annunciations can
be displayed simultaneously. A white horizontal
line separates annunciations that are acknowledged
from annunciations that are not yet acknowledged.
Acknowledged annunciations are always above
the line. Annuciations are displayed in order
of priority from top to bottom. The highest
priority annunciation is displayed at the top of the
Annunciation Window.
The Annunciation window is located to the
right of the Altitude and Vertical Speed windows
on the PFD display (or the MFD if system is in
reversionary mode). Up to 12 annunciations can
be displayed simultaneously. A white horizontal
line separates annunciations that are acknowledged
from annunciations that are not yet acknowledged.
Acknowledged annunciations are always above
the line. Annuciations are displayed in order
of priority from top to bottom. The highest
priority annunciation is displayed at the top of the
Annunciation Window.
• Alerts Window: The Alerts window displays
alert text messages. Up to 64 prioritized alerts
can be displayed in the Alerts window. Pressing
the ALERTS softkey displays the Alerts window.
Pressing the ALERTS softkey again removes the
Alerts window from the display. When the Alerts
window is displayed, the pilot may use the large
FMS knob to scroll through the alert list. Higher
priority alerts are displayed at the top of the window.
Lower priority alerts are displayed at the bottom of
the window.
can be displayed in the Alerts window. Pressing
the ALERTS softkey displays the Alerts window.
Pressing the ALERTS softkey again removes the
Alerts window from the display. When the Alerts
window is displayed, the pilot may use the large
FMS knob to scroll through the alert list. Higher
priority alerts are displayed at the top of the window.
Lower priority alerts are displayed at the bottom of
the window.
• ALERTS Softkey Annunciation: When the
Alerting System issues an alert, the ALERTS softkey
is used as a flashing annunciation to accompany an
alert. During the alert, the ALERTS softkey assumes
a new label consistent with alert level (WARNING,
CAUTION, or ADVISORY). Pressing the softkey
annunciation acknowledges that the pilot is aware of
the alert. The softkey then returns to the previous
ALERTS label. The pilot can then press the ALERTS
softkey again to view alert text messages.
is used as a flashing annunciation to accompany an
alert. During the alert, the ALERTS softkey assumes
a new label consistent with alert level (WARNING,
CAUTION, or ADVISORY). Pressing the softkey
annunciation acknowledges that the pilot is aware of
the alert. The softkey then returns to the previous
ALERTS label. The pilot can then press the ALERTS
softkey again to view alert text messages.
• System Annunciations: Typically, a large red ‘X’
appears in a window when a related LRU fails or
detects invalid data.
detects invalid data.
• Audio Alerting System: The G1000 system issues
audio alert tones when specific system conditions
are met. See the Alert Levels Definitions section for
more information.
are met. See the Alert Levels Definitions section for
more information.
Figure 10-1 G1000 Alerting System
Annunciation
Window
Alerts Window
ALERTS Softkey
Annunciation
System
Annunciation
Red ‘X’