GE zgu36l6d 사용자 설명서
6
Installation Preparation
Professional Gas Cooktops
• Saw
• Measuring tape
• Carpenter’s square
• Pipe and fittings as required.
• Manual gas line shut-off valve.
• Gas pressure regulator (supplied)
• Large flat-blade screwdriver
• Pipe wrench
• Measuring tape
• Carpenter’s square
• Pipe and fittings as required.
• Manual gas line shut-off valve.
• Gas pressure regulator (supplied)
• Large flat-blade screwdriver
• Pipe wrench
Tools &
Materials
Required:
Materials
Required:
• Gas-resistant pipe joint sealant
• 5 foot, 5/8" AGA-certified flexible metal gas
• 5 foot, 5/8" AGA-certified flexible metal gas
supply line. (Length must comply with local
codes.)
–If required by local codes, use solid pipe
codes.)
–If required by local codes, use solid pipe
fittings.
Note: Purchase new flexible line. DO NOT
USE OLD, PREVIOUSLY USED FLEXIBLE
LINE.
USE OLD, PREVIOUSLY USED FLEXIBLE
LINE.
Gas Supply:
• The natural gas models are designed to
• The natural gas models are designed to
operate at 6" to 14" water column pressure.
• The liquid propane models are designed to
operate at 11" to 14" water column pressure.
A regulator is required at the L.P. source to
provide a maximum of 14" water pressure to
the range regulator.
A regulator is required at the L.P. source to
provide a maximum of 14" water pressure to
the range regulator.
• These gas cooktops are supplied with 1/2"
NPT female gas connection located at the
left rear corner.
left rear corner.
• A minimum 5/8" dia. metal flexible line is
required.
–Use 5-foot long 5/8" flexible metal tubing.
(Length must comply with local codes.)
–Use 5-foot long 5/8" flexible metal tubing.
(Length must comply with local codes.)
• For rigid connection, locate the pipe stub
within area shown.
• Install a manual shut-off valve in the gas line,
in an easily accessible location.
Power
Supply
Locations
Supply
Locations
Electric Supply:
These cooktops must be supplied with 120
volt, 60 Hz., and connected to a individual,
properly grounded branch circuit protected
by a 15 amp circuit breaker or time delay fuse.
These cooktops must be supplied with 120
volt, 60 Hz., and connected to a individual,
properly grounded branch circuit protected
by a 15 amp circuit breaker or time delay fuse.
The power cord of this appliance is equipped
with a three-prong (grounding) plug which
mates with a standard three-prong grounding
wall receptacle to minimize the possibility of
shock hazard from this appliance.
with a three-prong (grounding) plug which
mates with a standard three-prong grounding
wall receptacle to minimize the possibility of
shock hazard from this appliance.
If the electrical service provided does not
meet the above specifications, it is recom-
mended that a licensed electrician install an
approved outlet.
meet the above specifications, it is recom-
mended that a licensed electrician install an
approved outlet.
DO NOT UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.
THIS APPLIANCE.
Three Prong Receptacle
Receptacle Box Cover Plate
Three Prong Plug
• Locate the electric supply within the area
shown or within reach of the cooktop’s six
foot power cord.
foot power cord.
• To avoid tangling cord with items stored in
the cabinet, locate the receptacle on rear
wall, inside the cabinet.
wall, inside the cabinet.
Gas Line
to Cooktop
to Cooktop
Locate Gas Supply 2" Maximum
Protrusion From Wall or on Floor 2" From Wall
Protrusion From Wall or on Floor 2" From Wall
2"
7" for 36" Models
17" for 48" Models
17" for 48" Models
16"