ZyXEL Communications P-660RU-T V2 사용자 설명서

Chapter 3 Wizard Setup

P-660RU-T v2 User’s Guide

Figure 12   Internet Access Wizard Setup: LAN Configuration

The following table describes the labels in this screen.

The ZyXEL Device automatically tests the connection to the computer(s) connected to the 
LAN ports. To test the connection from the ZyXEL Device to the ISP, click Start Diagnose. 
Otherwise click Return to Main Menu to go back to the Site Map screen. 

Table 9   Internet Access Wizard Setup: LAN Configuration

LAN IP Address

Enter the IP address of your ZyXEL Device in dotted decimal notation, for 

example, 192.168.1.1 (factory default). 

LAN Subnet Mask

Enter a subnet mask in dotted decimal notation.

DHCP

DHCP Server

From the DHCP Server drop-down list box, select On to allow your ZyXEL 

Device to assign IP addresses, an IP default gateway and DNS servers to 

computer systems that support the DHCP client. Select Off to disable DHCP 

server. 
When DHCP server is used, set the following items:

Client IP Pool Starting 

Address

This field specifies the first of the contiguous addresses in the IP address 

pool.

Size of Client IP Pool

This field specifies the size or count of the IP address pool.

Primary DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to 

the DHCP clients along with the IP address and the subnet mask.

Secondary DNS 

Server

As above.

Back

Click Back to go back to the previous screen.

Finish

Click Finish to save the settings and proceed to the next wizard screen.