Garmin g1000 mooney systemoverview m20m m20r 사용자 설명서
190-000442-01 Rev. A
Garmin G1000 System Overview for Mooney M20M & M20R
2-9
SYSTEM OVERVIEW
• (15) PROC Key – Selects approaches, departures
and arrivals from the flight plan. If a flight plan is
used, available procedures for the departure and/or
arrival airport are automatically suggested. If a
flight plan is not used, the desired airport and the
desired procedure may be selected. This key selects
IFR departure procedures (DPs), arrival procedures
(STARs) and approaches (IAPs) from the database
and loads them into the active flight plan.
used, available procedures for the departure and/or
arrival airport are automatically suggested. If a
flight plan is not used, the desired airport and the
desired procedure may be selected. This key selects
IFR departure procedures (DPs), arrival procedures
(STARs) and approaches (IAPs) from the database
and loads them into the active flight plan.
• (16) ENT Key – Accepts a menu selection or data
entry. This key is used to approve an operation
or complete data entry. It is also used to confirm
selections and information entries.
or complete data entry. It is also used to confirm
selections and information entries.
• (17) Dual ALT Knob – Sets the reference altitude
in the box located above the Altimeter. The large
knob selects the thousands, while the small knob
selects the hundreds.
knob selects the thousands, while the small knob
selects the hundreds.
NOTE: The selected COM (displayed in green)
is controlled by the COM MIC key on the audio
panel (GMA 1347).
panel (GMA 1347).
2.4 SECURE DIGITAL CARDS
The GDU 1040 data card slots use Secure Digital (SD)
cards. SD cards are used for aviation database updates
and terrain database storage.
and terrain database storage.
To install an SD card:
1. Insert the SD card in the SD card slot located
on the right side of the display bezel (the front
of the card should be flush with the face of the
display bezel).
of the card should be flush with the face of the
display bezel).
To remove an SD card:
1. Gently press on the SD card to release the
spring latch and eject the card.
NOTE: Please refer to the Pilot’s Guide Appen-
dices for instructions on updating the aviation
database.
database.