Hitachi 42pd7500a 사용자 설명서
37
Configuring the Setting (continued)
The DTT can be upgraded via the configuration menu.
1. Press MENU button on the remote control.
2. Select “Configuration” from the main menu.
3. Select “Receiver Upgrade”.
4. Press
2. Select “Configuration” from the main menu.
3. Select “Receiver Upgrade”.
4. Press
button to select “Automatic Download”
along with “Enabled”.
Automatic upgrade method takes place in standby/power save mode.
The indicator lamp will blink whilst this is taking place. The TV will
check if new software is available every time you go to standby/power
save or every night at 3:00 a.m. if select “Enabled”.
The indicator lamp will blink whilst this is taking place. The TV will
check if new software is available every time you go to standby/power
save or every night at 3:00 a.m. if select “Enabled”.
You can check the current software version on the configuration
menu. See .
menu. See .
NOTE
Manual upgrade starts if the “Search for New Version”
button is pressed instead of “Automatic Download” button. To
use this method, follow each dialogue box in sequence.
button is pressed instead of “Automatic Download” button. To
use this method, follow each dialogue box in sequence.
Automatic Download
Search for New Version
Enabled
More
i+
Exit
MENU
Common Interface enables you to plug in a module
which for example receives Pay TV service.
Once the common interface module has been
successfully inserted, select a service from the main
menu as follows.
which for example receives Pay TV service.
Once the common interface module has been
successfully inserted, select a service from the main
menu as follows.
1. Press MENU button on the remote control.
2. Select “Common Interface” to show a new menu.
3. Select one of the buttons to enter that module's menu.
2. Select “Common Interface” to show a new menu.
3. Select one of the buttons to enter that module's menu.
Each module display different item, depending on the module
inserted.
inserted.
Common Interface
Figure 1. Common Interface Menu
with modules inserted into the slots.
with modules inserted into the slots.
Media Guard
TV Setup menu can be accessed from the DTT main
menu. As selecting Setup, it jumps to the TV main menu
containing Analogue TV functions.
Refer to
menu. As selecting Setup, it jumps to the TV main menu
containing Analogue TV functions.
Refer to
regarding the settings for details.
Picture
Audio
Timer
Function
Setup
Select
OK Set
Audio
Timer
Function
Setup
Select
OK Set
39
51
Common Interface
No Common Interface
module detected.
module detected.
Figure 2. Common Interface without
module inserted.
module inserted.
Using Common Interface
TV Setup Menu
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
NOTE
We do not recommend that the set is left in standby/power save
mode if you intend to leave the home for a long time.
mode if you intend to leave the home for a long time.
NOTE
Please ask the service provider if the module type is suitable for
TV. The TV supports the modules meeting DVB standard.
TV. The TV supports the modules meeting DVB standard.
NOTE
While downloading software, you cannot operate TV. No picture is
displayed, either.
displayed, either.
Upgrading DTT
36
By activating Favourite Mode from the configuration menu, only
selected favourite channels will appear when using CHANNEL
UP/DOWN button on the remote control to switch channels.
Refer to how to set the channel as Favourites.
selected favourite channels will appear when using CHANNEL
UP/DOWN button on the remote control to switch channels.
Refer to how to set the channel as Favourites.
1. Press MENU button on the remote control.
2. Select “Configuration” from the main menu.
3. Select “Favourite Mode”.
4. Use
2. Select “Configuration” from the main menu.
3. Select “Favourite Mode”.
4. Use
to select “On” to be activated.
Setting Favourite Mode
32