Fujitsu M10-4S 사용자 설명서
Table 2-6
System operation status indicated by LEDs (continued)
Icon
Name
Color
Description
CHECK
Amber Indicates the system operation status for each chassis.
●
On: An error that prevents startup was detected.
●
Off: Normal,or the power is disconnected or not
being supplied.
●
Blinking (*): Indicates that the chassis requires
maintenance (this function is also referred to as the
"locator").
* The blink interval is 1 second (1 Hz).
Table 2-7
System status indicated by combination of LEDs
LED state
Description
POWER
XSCF
STANDBY
STANDBY
CHECK
Off
Off
Off
Power is disconnected.
Off
Off
On
Power has just been turned on.
Off
Blinking (*)
Off
The XSCF is being initialized.
Off
Off
On
The XSCF has detected an error.
Off
On
Off
The XSCF is in the standby state.
The system is waiting for power-on of the air
conditioning facilities (in the data center).
On
On
Off
Warm-up standby processing is in progress. After
the end of this processing,the system starts up.
System startup processing is in progress.
The system is operating.
Blinking (*)
On
Off
System stop processing is in progress. After the
end of processing,the fan unit stops.
* The blink interval is 1 second (1 Hz).
2.3.2
LEDs on the rear panel (System locator)
The field engineer or system administrator can identify the chassis requiring
maintenance by using the CHECK LED (A in the figure) on the rear panel. The
CHECK LED on the rear panel is referred to as the system locator, and has the same
function as the CHECK LED on the operation panel.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･ December 2013
24