OKI 791 사용자 설명서
![OKI](https://files.manualsbrain.com/attachments/746962050649a0feb60a3178c50308424e8c349a/common/fit/150/50/0a52b6498c5909275baef8361703ddfcf89c4a81825ec17b78f572dd7bcc/brand_logo.png)
ML790/791 Printer Handbook
9
Your printer has provision for single-sheet paper feed from the top and for continu-
ous-form paper feed from the rear. You can also install options: the Cut Sheet Feeder,
which holds a stack of 100 sheets for feeding from the top and the Push and/or Pull
Tractors for feeding continuous-form labels, heavy card stock or multi-part forms from
the bottom. See Chapter 5 for more information on these options.
ous-form paper feed from the rear. You can also install options: the Cut Sheet Feeder,
which holds a stack of 100 sheets for feeding from the top and the Push and/or Pull
Tractors for feeding continuous-form labels, heavy card stock or multi-part forms from
the bottom. See Chapter 5 for more information on these options.
Top Feed
• Single sheets (basis weight 14 to 24 lbs)
• Single envelopes
– 24-lb maximum
– 6.5” to 9.5” wide
– 6.5” to 9.5” wide
• Transparencies (8.5 x 11”)
Rear feed (continuous forms only, thickness to 0.014” [0.36 mm])
• Single-part continuous forms
– 12 to 24 lb.
– Minimum 3” wide (*
– Minimum 3” wide (*
1
)
• Carbonless, multi-part forms
– Original, plus 3 copies
– 9 to 11 lb
– Minimum 3” wide (*
– 9 to 11 lb
– Minimum 3” wide (*
1
)
• Interleaf, multi-part forms (with carbon paper)
– Original, plus 4 copies
– 10 to 12 lb paper, with 9 lb carbon
– Minimum 3” wide (*
– 10 to 12 lb paper, with 9 lb carbon
– Minimum 3” wide (*
1
)
C
hapter 2: Loading Paper
(*
1
) Please change mentioned below centering Position within a set-up group fol-
lowing indication of 32 pages when a form of 3” wide is used by Rear Feed.
In the case of ML790 “Mode 1”.
In the case of ML791 “Mode 2”.
In the case of ML790 “Mode 1”.
In the case of ML791 “Mode 2”.