GE 28031 series 사용자 설명서

33

Cued-up music typically produces the best sounding recorded ringer. It is 

recommended to begin recording your ringer at the beginning of a song, 

rather than a portion from the middle to produce an audibly pleasing 

custom ringer.

1.  Make sure your phone is 

OFF (not in talk 

mode). 

.  Press the MENU button and use the  6 or 5  

button to scroll to 

SOUND SETTING. 

3.  Press the SELECT button to enter the menu.
4.  Use the  6 or 5  button to scroll to 

TONE.

5.  Press the SELECT button to show the options.
6.  Use the  6 or 5  button to scroll to 

RING TONE. 

7.  Press the SELECT button to show the 3 ways 

to record your unique ringer tones

8.  You may record your ringer tones via the included audio cable, via an 

optional headset or via the handset microphone.

9.  Use the  6 or 5  button to scroll to the correct setting. 
10. Press the SELECT button to enter the count-down display.

NOTE: If the memory is full, the handset will prompt  FULL 

Audio Cable: Before recording the ringer tone, make sure that the 

provided audio cable is correctly installed into your computer or CD 

player or TAPE player by inserting the 3.5mm plug (the larger end of the 

connector) into the headphone jack of your PC or audio source, and insert 

the .5mm plug (the smaller end of the connector) into the headset jack 

on the side of your 8041 handset or Optional Model 8011 handset.
Optional Headset: Before recording the ringer tone, make sure that the 

optional headset is connected to the headset jack on the side of your 

8041 handset or Optional Model 8011 handset.
From the REC RINGER TONE menu;

1.  Use the  6 or 5  button to scroll to the 

AUDIO_CABLE or HEADSET.

.  Press the SELECT button to enter.